Cloned Hdd Won't Boot Windows 10: Solving The Problem

by
Cloned Windows10 1TB HDD to 500GB SSD Now HDD won't boot and nor the SSD!
Cloned Windows10 1TB HDD to 500GB SSD Now HDD won't boot and nor the SSD! from forum.macrium.com

Cloned HDD Won’t Boot Windows 10: Solving the Problem

Having an issue with your cloned HDD not booting Windows 10 can be a huge headache. It can be especially frustrating if you have important data stored on the drive, or if it was a new installation. Fortunately, there are a few solutions that you can try to get your cloned HDD to boot up. In this article, we’ll go over the most common solutions to the problem and how to get your cloned HDD booting Windows 10 in no time.

What is a Cloned HDD?

A cloned HDD, or hard drive, is a copy of another hard drive or storage device. This means you can use the cloned drive to store data or boot up your computer without having to reinstall Windows. Cloned HDDs are convenient because you can use them as a backup drive in case the original drive fails, or as a way to quickly move data between computers.

Why Won’t My Cloned HDD Boot Windows 10?

There are a few different reasons why your cloned HDD might not be booting Windows 10. These include:

  • The original drive was not properly prepared before cloning.
  • The cloned drive is not formatted correctly.
  • The cloned drive is not set as the primary boot device.
  • The cloned drive is not compatible with your computer.

How to Fix the Problem

1. Preparing the Original Drive

If the original drive was not properly prepared before being cloned, then the cloned drive might not boot Windows 10. To prepare the original drive, you should create a system image and store it on a separate drive. This will ensure that all of the necessary files and settings are stored in the image and can be used to boot up the cloned drive.

2. Formatting the Drive

If the cloned drive is not formatted correctly, then it won’t be able to boot up Windows 10. To format the drive correctly, you should use either the NTFS or FAT32 file system. If you’re unsure of which file system to use, you can consult the documentation for your specific computer.

3. Setting the Cloned Drive as the Primary Boot Device

If the cloned drive is not set as the primary boot device, then it won’t be able to boot up Windows 10. To set the cloned drive as the primary boot device, you’ll need to access the BIOS settings on your computer. Once you’re in the BIOS, you can set the cloned drive as the primary boot device and save the settings.

4. Checking Compatibility

If the cloned drive is not compatible with your computer, then it won’t be able to boot up Windows 10. To check compatibility, you’ll need to make sure that the cloned drive is the same type (SATA, IDE, etc.) as the original drive. You’ll also need to make sure that the cloned drive is the same size or larger than the original drive.

Conclusion

Having a cloned HDD not booting Windows 10 is a common problem, but luckily it’s one that can be easily fixed. By following the steps outlined in this article, you should be able to get your cloned HDD booting Windows 10 in no time. Remember to always create a system image before cloning a drive, and to check the compatibility of the cloned drive before attempting to boot it up.