Copy Hdd Os To Ssd: Step-By-Step Guide

The Best Tool for Migrating Data to Kingston SSD
The Best Tool for Migrating Data to Kingston SSD from

Copy HDD OS To SSD: Step-By-Step Guide

In today’s world, having a reliable computer is essential. It can be difficult to keep up with the latest technology and hardware, but it’s important to do so if you want to get the best performance out of your PC. One of the most popular upgrades you can make is to install a Solid State Drive (SSD) and move your Operating System (OS) over to it.

In this guide, we’ll show you how to copy your HDD OS to an SSD. We’ll cover the hardware, software, and steps needed to make this upgrade. Let’s get started!

Hardware Requirements

The hardware requirements for copying your HDD OS to an SSD can vary depending on your setup. Generally, you’ll need an SSD, a 2.5” or 3.5” SATA hard drive, a SATA to USB cable, and a Phillips screwdriver. You’ll also need an external hard drive enclosure to install the SSD and HDD in.

Software Requirements

The software requirements for this process are fairly simple. You’ll need a cloning tool such as EaseUS Todo Backup Free, Macrium Reflect Free, or AOMEI Backupper Standard. All of these tools are free and easy to use.

Step 1: Preparation

The first step is to prepare the hardware. Start by connecting the SSD to the external hard drive enclosure. Make sure the drive is securely connected and then close the enclosure. Next, connect the HDD to the enclosure. Make sure both the SSD and HDD are securely connected and then close the enclosure.

Step 2: Cloning

Once the hardware is ready, it’s time to clone the HDD OS to the SSD. Start by launching the cloning tool you installed earlier. Select the source drive (the HDD) and target drive (the SSD) and then click “Clone” to start the process. The cloning process can take some time, so be sure to leave your computer running until the process is complete.

Step 3: Booting From the SSD

Once the cloning process is complete, it’s time to boot from the SSD. Start by disconnecting the HDD and disconnecting the enclosure. Then, connect the SSD to the computer and power it up. Once the computer starts, you should see the BIOS screen. From here, you can select the SSD as the boot device and continue with the boot process.

Step 4: Installing Drivers

Once your computer boots from the SSD, you’ll need to install any appropriate drivers. Drivers are necessary for the hardware to function properly. If you’re not sure which drivers you need to install, you can use a tool such as DriverEasy to help identify and install the necessary drivers.

Step 5: Testing

The final step is to test the SSD to make sure everything is working properly. Start by running a disk benchmark test to make sure the SSD is performing as expected. You can also run a stress test to make sure the SSD is stable. Once you’ve tested the SSD, you can start using it as your primary storage device.


Copying your HDD OS to an SSD can be a great way to improve the performance of your computer. The process is fairly simple and straightforward, but it’s important to take your time and make sure everything is done properly. We hope this guide has helped you understand how to copy your HDD OS to an SSD.